The Indian Institute of Technology Madras is one of the most highly esteemed public engineering institutes in India. To gain entry into the IIT Madras MTech program, one must pass the GATE examination, the results of which will be announced on March, 2023. Shortly after the selection process, the IIT Madras MTech cutoff 2023 will be revealed. People looking to take part in one of the M.Tech courses provided by IIT Madras should look into the MTech cutoff for IIT Madras previous to commencing the selection process to decide on if they’re qualified.
Aspiring applicants who are keen to attend IIT Madras can refer to this article to gain knowledge about the elements that influence the IIT Madras cutoff for MTech, the cutoff marks from the previous year, and the cutoffs based on categories for better comprehension.
Table of Contents
IIT Madras MTech Cutoff 2023
The IIT Madras MTech Cutoff 2023 is the minimum score required for applicants to be considered for any MTech course at IIT Madras. Different factors may influence the IIT Madras GATE MTech Cutoff.
Aspiring applicants who are keen to attend IIT Madras can refer to this article to gain knowledge about the elements that influence the IIT Madras cutoff for MTech, the cutoff marks from the previous year, and the cutoffs based on categories for better comprehension.
IIT Madras MTech Cutoff 2022
The IIT Madras cutoff MTech of the previous years’ is provided to understand the cutoff level. The cutoff varies with different departments and specialisations. The below table provides the IIT Madras MTech cutoff 2020.
IIT Madras GATE Cut off 2022 |
|||||||||||
Pgm |
Disp |
Non_PwD_Cutoff |
PwD Cutoff |
||||||||
GEN |
OBC |
SC |
ST |
EWS |
GEN |
OBC |
SC |
ST |
EWS |
||
AE1Y |
AE |
647 |
554 |
348 |
534 |
456 |
– |
– |
– |
– |
– |
AE1Y* |
ME |
756 |
704 |
492 |
410 |
740 |
701 |
308 |
|||
AE1Y* |
AU,CE,CH,EN,MF,MM,NA,PR |
788 |
– |
– |
– |
– |
– |
– |
– |
– |
– |
AE1Y* |
CS,EC,EE,IN,ZE,ZS |
– |
– |
– |
– |
– |
– |
– |
– |
– |
– |
AM1Y |
AE, AU, CE, CH, ME, MM, NA, PR, ZE |
732 |
673 |
408 |
402 |
708 |
382 |
303 |
– |
– |
– |
AM2Y |
BM |
598 |
486 |
214 |
370 |
– |
– |
– |
– |
– |
|
AM2Y* |
IN |
615 |
– |
– |
– |
– |
– |
– |
– |
– |
– |
AM2Y* |
AE, CE, CH, CS, EC,EE, ME, MM, ZE |
730 |
725 |
533 |
383 |
– |
– |
299 |
– |
– |
– |
BT1Y |
AE, AG, AR, AU, BI, BM, BT, CE, CH, CR, CS, EC, EE, EN, EP, ES, IE, IN, IT, ME, MF, ML, MM, MR, NA, PE, PI, PR, ZE |
765 |
641 |
358 |
266 |
578 |
– |
333 |
– |
– |
– |
CA1Y |
CH,ZE |
598 |
456 |
398 |
345 |
535 |
– |
– |
– |
– |
– |
CA1Y |
CY,ZS |
657 |
497 |
– |
– |
– |
– |
– |
– |
– |
– |
CE1Y |
CE |
755 |
715 |
604 |
460 |
718 |
– |
– |
293 |
– |
– |
CE1Y |
AR |
842 |
733 |
– |
– |
– |
539 |
– |
– |
– |
– |
CE1Y* |
ZE |
– |
– |
– |
– |
– |
– |
– |
– |
– |
– |
CE2Y |
CE |
698 |
673 |
545 |
447 |
639 |
416 |
414 |
276 |
||
CE2Y* |
AG,BT,CH,ES,ME,ZE |
731 |
– |
– |
– |
– |
– |
– |
– |
– |
– |
CE3Y |
CE |
731 |
608 |
522 |
487 |
644 |
434 |
249 |
– |
– |
– |
CE3Y* |
ZE |
– |
– |
– |
– |
– |
– |
– |
– |
– |
– |
CE4Y |
CE |
691 |
668 |
535 |
416 |
604 |
559 |
– |
– |
– |
– |
CE4Y* |
AG |
701 |
693 |
– |
– |
– |
– |
– |
– |
– |
– |
CE4Y* |
ES,ME,ZE |
– |
– |
– |
– |
– |
– |
– |
– |
– |
– |
CE5Y |
CE |
789 |
719 |
562 |
515 |
781 |
392 |
– |
– |
– |
– |
CE5Y* |
ZE |
– |
– |
– |
– |
– |
– |
– |
– |
– |
– |
CE6Y |
CE |
747 |
711 |
604 |
489 |
681 |
346 |
– |
– |
– |
|
CE6Y* |
AR,ZE |
787 |
– |
– |
– |
– |
– |
– |
– |
– |
– |
CH1Y |
BI,CH,ES,ZE,ZS |
603 |
477 |
329 |
324 |
426 |
– |
372 |
– |
– |
– |
CH1Y* |
BI,CE,CH,ES,ZE,ZS |
– |
481 |
337 |
– |
– |
– |
– |
– |
– |
– |
CL1Y |
BM |
432 |
337 |
296 |
– |
– |
– |
– |
– |
– |
– |
CL1Y |
AE, CE, CS, EC, EE, IN, ME |
727 |
688 |
398 |
404 |
607 |
– |
– |
– |
– |
– |
CL1Y |
BT, BI, CH, EP, MM, PI |
601 |
567 |
283 |
311 |
516 |
– |
– |
– |
– |
– |
CL1Y |
AG, AR, AU, CR, EN, ES, IE, IT, MF, ML, MR, NA, PE, PI, PR, ZE |
708 |
– |
418 |
– |
585 |
– |
– |
– |
– |
– |
CS1Y |
AE,AG,AR,AU,BI,BM,BT,CE,C H,CR,CS,EC,EE,EN,EP,ES,IE,IN ,IT,ME,MF,ML,MM,MR,NA,P E,PI,PR,ZE,CY,GG,MA,MC,M P,MS,NT,OR,PH,ST,ZL,ZS |
820 |
722 |
571 |
416 |
757 |
476 |
332 |
249 |
– |
280 |
EE1Y |
EC,EE,EP,IN,ZE |
683 |
612 |
436 |
383 |
587 |
– |
246 |
313 |
– |
– |
EE2Y |
EC,EE,EN,EP,IN,ZE |
782 |
757 |
596 |
543 |
753 |
471 |
– |
– |
– |
– |
EE3Y |
EC,EE,EP,IN,ZE |
831 |
741 |
624 |
462 |
808 |
500 |
– |
– |
– |
358 |
EE4Y |
BM,EC,EE,EP,IN,ZE |
832 |
785 |
630 |
478 |
803 |
458 |
– |
– |
– |
– |
EE5Y |
PH,EP |
669 |
487 |
– |
– |
– |
– |
– |
– |
– |
– |
EE5Y |
EC,EE,IN,ZE |
782 |
735 |
517 |
450 |
678 |
– |
– |
– |
– |
267 |
EE6Y |
EE,EC,EP,IN,ZE |
877 |
810 |
637 |
535 |
871 |
557 |
350 |
– |
– |
– |
EE7Y |
EE,EC,EP,IN,ZE |
770 |
734 |
558 |
464 |
721 |
– |
– |
– |
– |
– |
MA1Y |
MA |
659 |
536 |
429 |
249 |
586 |
429 |
– |
411 |
– |
– |
MA1Y* |
PH |
742 |
712 |
567 |
– |
– |
– |
– |
– |
– |
– |
MA1Y* |
AE,CE,CH,CS,EC,EE,ME,MM, NA |
875 |
818 |
588 |
843 |
420 |
– |
– |
– |
– |
|
ME1Y |
ME, AE, CH |
755 |
649 |
427 |
344 |
634 |
420 |
– |
– |
– |
373 |
ME1Y* |
AU,EN,MR,PE,ZE,ZS |
822 |
– |
599 |
– |
– |
– |
– |
– |
– |
– |
ME2Y |
ME, AE, AU |
795 |
737 |
563 |
427 |
760 |
471 |
– |
362 |
– |
– |
ME2Y* |
ZE,ZS |
– |
– |
– |
– |
– |
– |
– |
– |
– |
– |
ME3Y |
ME,IN,MF,ML,PI,PR |
717 |
643 |
429 |
305 |
600 |
382 |
343 |
– |
– |
341 |
ME3Y* |
AE,AU,EC,EE,IE,ZE |
722 |
668 |
– |
– |
– |
– |
489 |
– |
– |
– |
MM1Y |
MM |
492 |
347 |
242 |
323 |
282 |
– |
– |
– |
– |
– |
MM1Y* |
BT,CH,CR,CY,ME,MF,MS,NT, PH,PR,ZE,ZS |
678 |
632 |
414 |
297 |
– |
– |
– |
– |
– |
– |
OE1Y |
CE,NA |
646 |
542 |
389 |
366 |
539 |
– |
– |
– |
– |
– |
OE2Y |
CE,ME,NA |
626 |
598 |
414 |
259 |
594 |
– |
– |
– |
– |
– |
PE1Y |
AE,AG,AR,AU,BI,BM,BT,CE,C H,CR,CS,EC,EE,EN,EP,ES,IE,IN ,IT,ME,MF,ML,MM,MR,NA,P E,PI,PR,ZE,CY,GG,MA,MC,M P,MS,NT,OR,PH,ST,ZL,ZS |
753 |
605 |
462 |
410 |
728 |
– |
– |
– |
– |
– |
PH1Y |
PH |
529 |
426 |
304 |
335 |
– |
– |
– |
– |
– |
|
PH1Y* |
EP,NT |
602 |
547 |
– |
– |
– |
– |
– |
|||
PH1Y* |
CY,EE,MM,MS,ZE |
735 |
539 |
– |
– |
– |
– |
– |
IIT Madras Gate cutoff 2019 for MTech
Here we will provide an overview of the Indian Institute of Technology Madras (IIT Madras) Gate cutoff scores for admission to the Master of Technology (MTech) program in 2019.
Discipline |
Eligible Discipline CodesCodes |
GeneraGENl |
BCSC |
S STC |
OBC |
Aerospace Engineering |
AE |
847 |
752 |
444 |
276 |
Aerospace Engineering |
ME |
794 |
782 |
648 |
|
Engineering Mechanics (Fluid Mechanics/Solid Mechanics) |
AE CE CH ME MT XE |
786 |
739 |
564 |
446 |
Biomedical Engineering (Biomedical B.Tech) |
AE CE CH CS EC EE ME MT XE IN |
581 |
434 |
||
Biomedical Engineering |
IN |
716 |
388 |
||
Biomedical Engineering |
AE CE CH CS EC EE ME MT XE |
736 |
635 |
||
Bioprocess Engineering |
BT CH |
676 |
591 |
487 |
487 |
Catalysis Technology |
CH XE |
539 |
489 |
394 |
|
Building Technology an d Construction Management |
CE |
863 |
754 |
639 |
|
Building Technology an d Construction Management |
AR |
856 |
195 |
||
Environmental Engineering |
CE |
800 |
724 |
692 |
|
Geotechnical Engineering |
CE |
810 |
804 |
584 |
|
Hydraulic and Water Resources Engineering |
CE |
795 |
744 |
591 |
470 |
Hydraulic and Water Resources Engineering |
AG |
660 |
156 |
||
Structural Engineering |
CE |
895 |
846 |
640 |
|
Transportation Engineering |
CE |
826 |
747 |
524 |
497 |
Chemical Engineering |
CH |
694 |
603 |
294 |
448 |
Clinical Engineering |
AE BT CE CH CS EC EE IN ME MT PI TF XE |
682 |
577 |
383 |
382 |
Computer Science and Engineering |
CS |
770 |
695 |
560 |
394 |
Communication and Signal Processing |
EC |
692 |
622 |
436 |
320 |
Power System and Power Electronics |
EE |
762 |
576 |
470 |
|
Micro Electronics and VLSI Design |
EC |
775 |
662 |
589 |
365 |
Control and Instrumentation |
IN |
755 |
705 |
563 |
292 |
Control and Instrumentation |
EC EE |
749 |
742 |
624 |
433 |
Microelectronics and Photonics |
EC EE IN |
766 |
698 |
503 |
273 |
Integrated Circuits and Systems |
EC EE IN |
745 |
727 |
616 |
268 |
IIT Madras MTech Cutoff 2017
Here we will discus IIT Madras Cutoff for MTech in 2017 and IIT Madras MTech CSE Cutoff.
M.Tech Program |
Programme Codes |
Eligible Discipline Codes |
General |
OBC |
SC |
ST |
Gen-PwD |
Aerospace Engineering |
AE1N |
AE |
592 |
– |
– – |
– |
– |
AE1N |
ME |
691 |
– |
– |
– |
– |
|
AE1N |
MF, MM, NA, PR, AU, CE, CH, EN |
599 |
– |
– |
– |
– |
|
Engineering Mechanics (Fluid Mechanics/Solid Mechanics) |
AM1N |
CE, CH, ME, MM, AE, AU, NA, ZE |
719 |
– |
– |
– |
– |
Biomedical Engineering |
AM2N |
BM |
387 |
– |
– |
– |
– |
Building Technology and Construction Management |
CE1N |
CE |
711 |
– |
– |
– |
– |
Environmental Engineering |
CE2N |
CE |
616 |
– |
– |
– |
– |
Geotechnical Engineering |
CE3N |
CE |
696 |
– |
– |
– |
– |
Hydraulic and Water Resources Engineering |
CE4N |
CE |
603 |
– |
– |
– |
– |
Structural Engineering |
CE5N |
CE |
772 |
– |
– |
– |
– |
Transportation Engineering |
CE6N |
CE |
712 |
– |
– |
– |
289 |
Chemical Engineering |
CH1N |
EV, ZE, ZS, CH, BI |
569 |
– |
– |
– |
– |
Photonics |
EE3N |
EC, EE, EP, IN, ZE |
733 |
– |
– |
– |
352 |
EE5N |
PH, EP |
331 |
– |
– |
– |
– |
|
EE5N |
EC, EE, IN, ZE |
723 |
— |
– |
– |
– |
|
EE6N |
EE, EC, EP, IN, ZE |
774 |
– |
– |
– |
– |
|
Industrial Mathematics and Scientific Computing |
MA1N |
MA |
358 |
– |
– |
– |
– |
Thermal Engineering |
ME1N |
ME |
768 |
– |
– |
– |
356 |
ME1N |
CH, MR, PE, ZE, ZS, AE, AU, EN |
– |
– |
– |
– |
||
Mechanical Engineering – Design |
ME2N |
ME |
796 |
– |
– |
– |
– |
ME2N |
ZE, ZS, AU, AE |
– |
– |
– |
— |
||
Manufacturing Engineering |
ME3N |
ME |
761 |
– |
– |
– |
253 |
ME3N |
Pl, PR,ZE, AE, AU, CS, EC, EE, IE, IN, MF, ML, NA |
812 |
– |
– |
– |
– |
|
Metallurgical and Materials Engineering |
MM IN |
MM |
454 |
– |
– |
– |
– |
MM1N |
PR, ZE, ZS, BT, CH, CR, CY, ME, MF, MS, NT, PH |
761 |
– |
– |
– |
– |
|
Ocean Engineering |
0E1N |
MR, NA, ZE, AE, CE, ME |
655 |
– |
– |
– |
– |
Solid State Technology |
PH1N |
PH |
259 |
– |
– |
– |
– |
IIT Madras MTech Cutoff 2016
Here we will discus IIT Madras MTech cutoff 2016.
Aerospace Engineering | AE1Y | AE | 585 | 551 | 352 | 411 |
Aerospace Engineering | AE1Y | ME | 772 | 732 | 647 | 309 |
Aerospace Engineering | AE1Y | AU,CE,CH,EN,MF,MM,NA,PR | 664 | – | – | – |
Applied Mechanics – Fluid Mechanics and Solid Mechanics | AM1Y | AE,AU,CE,CH,ME,MM,NA,ZE | 750 | 695 | 491 | 472 |
Applied Mechanics – Biomedical Engineering | AM2N | BM | 508 | 449 | – | – |
Applied Mechanics – Biomedical Engineering | AM2Y | IN | 708 | – | – | – |
Applied Mechanics – Biomedical Engineering | AM2Y | AE,CE,CH,CS,EC,EE,ME,MM | 760 | – | 465 | – |
Catalysis Technology | CA1Y | CH,ZE | 398 | 390 | 337 | 253 |
Catalysis Technology | CA1Y | CY, ZS | 578 | 530 | – | – |
Civil Engineering – Building Technology and Construction Management | CE1Y | CE | 810 | 708 | 522 | 643 |
Civil Engineering – Building Technology and Construction Management | CE1Y | AR | 860 | – | – | – |
Civil Engineering – Environmental Engineering | CE2Y | CE | 689 | 548 | 516 | – |
Civil Engineering – Environmental Engineering | CE2Y | AG,BT,CH,EV,ME,ZE | 704 | 619 | – | – |
Civil Engineering – Geotechnical Engineering | CE3Y | CE | 690 | 653 | 501 | – |
Civil Engineering – Hydraulic and Water Resources Engineering | CE4Y | CE | 671 | 542 | – | 363 |
Civil Engineering – Hydraulic and Water Resources Engineering | CE4Y | AG | 625 | – | 290 | – |
Civil Engineering – Hydraulic and Water Resources Engineering | CE4Y | EV,ME,ZE | – | – | – | 443 |
Civil Engineering – Structural Engineering | CE5Y | CE | 828 | 798 | 445 | – |
Civil Engineering – Transportation Engineering | CE6Y | CE | 743 | 693 | 544 | 364 |
Civil Engineering – Transportation Engineering | CE6Y | AR,ZE | 860 | – | – | – |
Chemical Engineering | CH1Y | B1,CH;EV,ZE,ZS | 592 | 472 | 373 | 425 |
Clinical Engineering | CL1Y | AE,AG,AR,AU,BI,BM,BT,CE | 694 | 592 | 438 | 393 |
Computer Science Engineering | – | AE,AG,AR,AU,BI,BM,BT,CE | 748 | 718 | 520 | 479 |
Electrical Engineering – Communication Systems | EE1Y | EC,EE,EP,IN,ZE | 777 | 710 | 589 | 412 |
Electrical Engineering – Power Systems and Power Electronics | EE2Y | EC,EE,EN,EP,IN,ZE | 759 | 661 | 505 | 510 |
Electrical Engineering – Microelectronics and VLSI Design | EE3Y | EC,EE,EP,IN,ZE | 819 | 745 | 717 | 455 |
Electrical Engineering – Control and Instrumentation | EE4Y | IN | 771 | 637 | 499 | 277 |
Electrical Engineering – Control and Instrumentation | EE4Y | BM,EC,EE,EP,ZE | 768 | 714 | – | – |
Electrical Engineering – Photonics | EE5Y | PH,EP | 451 | 359 | 256 | – |
Electrical Engineering – Photonics | EE5Y | EC,EE,IN,ZE | 748 | – | 501 | 434 |
M.Tech. in Industrial Mathematics and Scientific Computing | MA1N | MA | 452 | 352 | 291 | 225 |
Industrial Mathematics and Scientific Computing | MA1Y | AE,CE,CH,CS,EC,EE,ME,MM | 865 | – | 468 | 501 |
Mechanical Engineering – Thermal Stream | ME1N | ME | 798 | 770 | 581 | 424 |
Mechanical Engineering – Design Stream | ME2N | ME | 865 | 781 | 554 | 443 |
Mechanical Engineering – Manufacturing Engineering Stream | ME3Y | ME | 769 | 743 | 617 | 380 |
Mechanical Engineering – Manufacturing Engineering Stream | ME3Y | AE,AU,CS,EC,EE,IE,IN,MF,ML | 839 | – | 698 | – |
IIT Madras MTech cutoff 2023: FAQs
There is no specific cutoff point. A candidate’s category and specification determine the amount.
M.Tech admission to an IIT requires a rank below 200.
Candidates should achieve a GATE score of 400-800 to be considered for admission to IIT for MTech
The cutoff marks for the MTech program at IIT Madras are determined by the number of seats available for a course, the number of applications received for a particular course, the reservation of applicants, and the performance of applicants on relevant GATE papers.
IIT Madras has not yet begun the MTech admission process 2023.